Skip to main content

Physical security design for satellite assembly, integration and test facilities

During satellite assembly, integration and test, flight hardware can spend extended periods outside secure storage. Instruments are mounted, electrical connections are made and subsystems are brought together for the first time. Once testing begins, the relationship between the spacecraft, its support equipment and the instruments taking measurements can be as important as the condition of any individual component.


Physical security design at this stage centres on the working environment. A protected assembly or test area allows hardware to remain in place between operations while engineers retain the access they need. The design question is where that protection belongs as the satellite moves from a collection of separate components to an integrated spacecraft.


How integration changes the security requirement

Early in manufacture, individual components can often be issued for a particular operation and returned to controlled storage afterwards. Integration changes what the team is protecting. A payload fitted to a spacecraft now shares mechanical and electrical interfaces with other systems. Removing it for storage would introduce further handling and could require the team to repeat checks already completed.


The same principle applies during testing. Engineers rely on knowing which hardware was connected, how it was configured and under what conditions they collected a set of results. Unauthorised interference with a connection, test instrument or support fixture can call those results into question even when the flight hardware shows no visible damage.


That is why the scope of physical protection can extend beyond the satellite itself. Depending on the activity, it may include:


  • Flight instruments and subsystems undergoing assembly or integration.
  • Ground support equipment used to handle, power or communicate with the hardware.
  • Test equipment and fixtures that need to remain undisturbed between measurements.
  • Customer-owned technology or commercially sensitive work visible during the process.


The common consideration is whether access to one element could affect the integrity of the work as a whole. This gives the project team a reason for including each activity within the protected area.


Defining the protected working area

An assembly facility brings together people with different responsibilities. Mechanical and electrical engineers need access to the spacecraft at different stages. Test specialists may join for a particular campaign. Customer representatives may attend inspections or witness an agreed test. Each has a legitimate reason to be present, although the scope and duration of that access vary.


A controlled working area gives those permissions a physical boundary. Its extent should reflect which activities need to take place together. During integration, engineers may need direct access to several sides of an assembly and to the equipment connected to it. During a test, some personnel may be able to monitor progress or review results from outside the immediate test area.


This distinction is especially useful in facilities supporting several programmes. Restricting an entire technical hall to one project can limit the availability of shared equipment. Defining a protected assembly or preparation area can preserve separation between programmes while keeping common facilities available. Where a test requires exclusive use, that requirement can apply to the relevant stage of the campaign.


Coordinating physical security with cleanroom design

Satellite assembly and integration can take place in cleanrooms, where entry procedures, clothing and environmental controls help protect sensitive hardware from contamination. Those arrangements also influence how people move through a facility. The people authorised to enter a cleanroom, however, may work across several programmes, each with its own restrictions on access to hardware or technical information.


Physical security design and cleanroom design therefore need distinct performance requirements. A cleanliness classification describes environmental performance. A requirement for resistance to forced entry concerns the performance of the physical construction. Where both apply, the project team needs evidence appropriate to each.


The two disciplines meet at the boundary of the working area. Walls and entrances influence how personnel and equipment move. Changes to partitions can affect airflow and cleaning access. Security measures also need to accommodate the transfer of assemblies and support equipment without introducing unnecessary handling. Early coordination allows the cleanroom designer, security specialist and engineering team to resolve those interfaces while the layout can still be adapted.


Maintaining control throughout a test campaign

A test campaign can extend across several shifts, with periods of preparation, measurement, review and adjustment. The end of a shift does not necessarily provide a suitable point to dismantle the equipment. An instrument may need to remain aligned while engineers assess results, or a connected assembly may have to stay in a known configuration for a repeat measurement.


A protected test area allows the team to maintain that configuration between sessions. It also supports a clear handover. The incoming team can establish who has had access, which activities took place and whether the assembly is ready for the next operation. The responsibility for authorising a change to the test remains with the engineering team.


Access requirements can change within the same campaign. A customer attending a witness point may need to observe a measurement and review the result. The engineers conducting the test need closer and more sustained access. Recognising that difference allows facilities to support oversight while protecting neighbouring projects and work that falls outside the agreed scope of the visit.


The role of modular walling and enclosures

For an existing space facility, introducing a protected area does not always require a separate building. Modular security walling can divide a dedicated integration area from wider engineering activity. A modular security enclosure can form a complete protected room within a larger facility where the project requires a defined boundary around its work.


The choice depends on the programme, the existing construction and the level of protection required. A visual partition may provide commercial privacy. A project with a forced-entry requirement needs a system with evidence covering the proposed construction and configuration. In either case, the boundary has to accommodate the equipment and activities that give the area its purpose.


The value of physical security design during satellite assembly, integration and test becomes clearest between engineering operations. The hardware can remain mounted, the test equipment can remain connected and the people responsible for the next stage can retain control over who has access. As more of the spacecraft comes together, protecting that continuity becomes part of protecting the spacecraft itself.

Find out more about the Singular Security modular product range

New text element